Electrajet Page 3

ElectraJet Assembly

Next came the motor mount. Nothing real tricky here as well. They already had the wing pre-formed with spots for these two flat planks so all your really have to is glue them to the wing. I used quite of bite of epoxy here as I feel like this is a important part of the plane staying on in flight !!

This is the installed motor mount .

Next came running the wires for the speed control to the motor and mounting both the motor and the speed control..

This is the motor and gear box installed..

Here is where I found the best place to mount the speed control and the receiver and the delta mixer. I think this part from experience is just where it fits best and the weight is right. I have read that the receiver should go forward on the ElectraJet as they have a tendency to be little tail heavy anyway which this setup should work great for me.

I mounted my switch here which left room for the receiver to set on the other side as in the photo above.

I forgot to get a photo of the underside and the servos when I first installed them but here is some photos of the finished product.

Here is the servo's installed with a nice little touch, I used a sticker to secure and cover the enclosure..

Here is the aileron control horn installed..

Next: Page 4 ElectraJet building steps